| 594A/592D Timken Tapered Roller Bearing | B:28 mm; r1 min.:0.6 mm; l1 min.:86 mm; C1 max.:24 mm; G:M 39x3; α:6 °; d:40 mm; Material constant KM:330; Basic dynamic load rating C:150 kN; h:150 mm; d2 max.:94 mm; Specific dynamic load factor K:150 N/mm²; Basic static load rating C0:140 kN; l7 min.:46 mm; l2 max.:199 mm; dk:53 mm; Mass rod end:1.85 kg; |
| EE222070/222127CD Timken Tapered Roller Bearing | Basic Static Radial Load Rating Co:10200 N; Fillet Radius ra:1.00 mm; B:15.00 mm; Fillet Radius rb:0.60 mm; Grease Speed Rating n1:11000 rpm; Basic Dynamic Radial Load Rating C:19000 N; D:52.0000 mm; Oil Speed Rating n2:16000 rpm; d:20.000 mm; |
| HM926747/HM926710CD Timken Tapered Roller Bearing | Hexagonal key size for grub screw N:3.175 mm; J:47.6 mm; A5:26.9 mm; Recommended diameter for attachment bolts, mm G:10 mm; s1:22.2 mm; Limiting speed with shaft tolerance h6:3800 r/min; T:41.5 mm; Thread grub screw G2:1/4-28 UNF; Fatigue load limit Pu:0.475 kN; H:138 mm; N:10.7 mm; Recommended diameter for attachment bolts, inch G:0.375 in; A:32 mm; H1:52.4 mm; Basic dynamic load rating C:16.3 kN; |
| HH221440/HH221410D Timken Tapered Roller Bearing | Accessories:Two Seals; Basic Static Radial Load Rating Co:95000 N; B:44.40 mm; D:110.0000 mm; Grease Speed Rating n1:4000 rpm; d:50.000 mm; Sealed Speed Rating n3:4000 rpm; Oil Speed Rating n2:5300 rpm; Basic Dynamic Radial Load Rating C:95200 N; Fillet Radius ra:2.00 mm; |
| 95475/95927CD Timken Tapered Roller Bearing | Grease Speed Rating n1:3800 rpm; B:38.10 mm; Oil Speed Rating n2:5000 rpm; Accessories:No Shield, no Seal,; D:110.0000 mm; Sealed Speed Rating n3:4300 rpm; Basic Static Radial Load Rating Co:88000 N; Fillet Radius ra:1.50 mm; Basic Dynamic Radial Load Rating C:78100 N; d:60.000 mm; |
| LM739749/LM739710CD Timken Tapered Roller Bearing | d:3.000 in; Grease Speed Rating n1:5500 rpm; Fillet Radius rb:0.040 in; Basic Static Radial Load Rating Co:44000 N; B:0.7500 in; Oil Speed Rating n2:9000 rpm; Fillet Radius ra:0.08 in; D:4.5000 in; Basic Dynamic Radial Load Rating C:44200 N; |
| 48286/48220D Timken Tapered Roller Bearing | Static (Cor):16.7 mm; Pu:2610 kN; Dynamic (Cr):9 mm; rs (min):4 mm; Grease:4130 kN; with cylindrical bore:800 min-1; D:440 mm; Oil:345.870 kN; with tapered bore:1 000 min-1; d:260 mm; B:144 mm; |
| LM522549/LM522510D Timken Tapered Roller Bearing | b:3.2 mm; Basic dynamic load rating C:56 kN; dk:36.5 mm; da max.:29 mm; Specific static load factor K0:300 N/mm²; D:41.275 mm; rb max.:1 mm; r2 min.:1 mm; Basic static load rating C0:166 kN; Lubricant:Regular relubricatio; α:6 °; Specific dynamic load factor K:100 N/mm²; d:25.4 mm; Sealing solution:Triple-lip seals; da min.:27.5 mm; C:19.05 mm; B:22.225 mm; r1 min.:0.3 mm; Design (sliding contact surface combination):Steel/steel, heavy-d; |
| EE430888/431576CD Timken Tapered Roller Bearing Assembly | Reference speed:1900 r/min; Fatigue load limit Pu:71 kN; r3,4 min.:3 mm; Da min.:151 mm; r5 min.:1 mm; Calculation factor e:0.83; 2B:86 mm; b:15 mm; K:10 mm; T:93 mm; Calculation factor Y1:0.81; D:190 mm; da max.:110 mm; Calculation factor Y2:1.2; ra max.:3 mm; Basic dynamic load rating C:486 kN; Basic static load rating C0:630 kN; Mass bearing pair:11.4 kg; Limiting speed:3400 r/min; d:90 mm; |
| L521945/L521910D Timken Tapered Roller Bearing | Grease Speed Rating n1:6000 rpm; Oil Speed Rating Open/Shielded n2:7000 rpm; Accessories:Without Accessories; Fillet Radius ra:1.50 mm; Basic Static Radial Load Rating Co:32500 N; B:22.00 mm; Sealed Speed Rating n3:4000 rpm; Grease Speed Rating Open/Shielded n1:6000 rpm; d:60.000 mm; Oil Speed Rating n2:7000 rpm; Basic Dynamic Radial Load Rating C:47500 N; D:110.0000 mm; |
| 67786/67720CD Timken Tapered Roller Bearing | Mass bearing unit:0.92 kg; s1:30.1 mm; d:30 mm; B1:48.4 mm; Db2:83 mm; A5:20 mm; A:32.5 mm; H:141.5 mm; J6:98.5 mm; Db1:77 mm; Housing:FYTB 506 M/VZ033; Basic static load rating C0:11.2 kN; Basic dynamic load rating C:19.5 kN; Recommended diameter for attachment bolts, mm G:10 mm; R1:21 mm; Fatigue load limit Pu:0.475 kN; N4:2 mm; B4:5.95 mm; Thread grub screw G2:1/4-28 UNF; Hexagonal key size for grub screw N:3.175 mm; |
| 67791/67720CD Timken Tapered Roller Bearing | w:50 mm; l7 min.:50 mm; d4 ≈:58 mm; Basic static load rating C0:166 kN; α:6 °; G:M 39x3; r1 min.:0.6 mm; dk:53 mm; Mass rod end:2.2 kg; Basic dynamic load rating C:150 kN; l3 min.:65 mm; d:40 mm; Specific dynamic load factor K:150 N/mm²; Material constant KM:330; l4 max.:191 mm; h1:142 mm; B:28 mm; l5 ≈:25 mm; d2 max.:94 mm; C1 max.:24 mm; |
| 81600/81963CD Timken Tapered Roller Bearing | A2:187.325 mm; H1:133.35 mm; Ca:72.619 mm; Pa:22.2 kN; N1:22.225 mm; Mass pillow block:62.6 kg; h:46.038 mm; P60°:185 kN; H:258.762 mm; RG:1/2 NPT; P150°:66.7 kN; Housing:SAF 028 KA; Initial grease fill:379.89 g; Da:210 mm; Max. speed for PosiTrac Plus seal:1150 r/min; J max.:368.3 mm; Appropriate attachment bolt size G:0.75 in; Cap bolt recommended tightening torque:1220 N·m; H2:53.975 mm; |
| 95491/95927CD Timken Tapered Roller Bearing | Grease Speed Rating n1:7500 rpm; Basic Dynamic Radial Load Rating C:39000 N; Basic Static Radial Load Rating Co:24500 N; Fillet Radius rb:1.00 mm; d:35.000 mm; Oil Speed Rating n2:10000 rpm; Fillet Radius ra:1.50 mm; B:21.00 mm; D:80.0000 mm; |
| No. | Brand | J | F | A | a | N | s | G | d |
| NP995051/M244210CD | Timken | - | 40 mm | - | - | - | - | - | 35 mm |
| 861/854D | Timken | - | - | - | - | - | - | - | 35 mm |
| 52393/52637D | Timken | - | - | - | - | - | - | - | 20.000 mm |
| HM855449/HM855419D | Timken | - | - | - | - | - | - | - | - |
| HM252344/HM252315D | Timken | - | - | 66.675 mm | - | - | 29.766 mm | - | - |
| 93800/93127CD | Timken | - | - | - | - | - | - | - | 70.000 mm |
| EE113089/113171D | Timken | - | - | - | - | - | - | - | 70.000 mm |
| M241549/M241510CD | Timken | - | - | - | - | - | - | M 150x2 | 150 mm |
| 94700/94114CD | Timken | - | - | - | - | - | - | - | 75.000 mm |
| EE127095/127139D | Timken | - | - | 73.025 mm | - | - | 29.766 mm | - | - |
| 95525/95927CD | Timken | - | - | - | - | - | - | - | 35 mm |
| 95500/95927CD | Timken | - | - | - | - | - | - | - | - |
| 782/774D | Timken | - | - | - | - | - | - | - | 30.000 mm |
| 56418/56650CD | Timken | - | - | - | - | - | - | - | 30.000 mm |
| HH221449/HH221410D | Timken | - | - | - | - | - | - | - | 45 mm |
| 799/792CD | Timken | - | - | - | - | - | - | - | - |
| 681/672D | Timken | - | - | - | - | - | - | - | - |
| 48393/48320D | Timken | - | 767.5 mm | - | - | - | - | - | 690 mm |
| 93787/93127CD | Timken | - | - | - | - | - | - | - | - |
| 95491/95927CD | Timken | - | - | - | - | - | - | - | 35.000 mm |
| 67985/67920CD | Timken | - | - | - | - | - | - | M 20x1.5 | 20 mm |
| EE275100/275156D | Timken | - | - | - | - | - | - | - | 750 mm |
| LM446349/LM446310D | Timken | - | - | - | - | - | - | - | - |
| 778/774D | Timken | 105 mm | - | 39 mm | - | 16 mm | - | - | 42.862 mm |
| 95528/95927CD | Timken | - | - | - | - | - | - | - | 25.000 mm |
| EE134100/134144CD | Timken | - | - | - | - | - | - | - | - |
| 99575/99102CD | Timken | - | - | - | - | - | - | - | 20.000 mm |
898/892CD Timken Tapered Roller Bearing Video
TSF (Tapered Single with Flange) Imperial - Timken CAD
Browse Part Number 898 - 892-B, Tapered Roller Bearings - TSF (Tapered Single with Flange) Imperial in the The Timken Company catalog including Part
892CD, Tapered Roller Bearings - Timken CAD
Part Number 898 - 892CD, Tapered Roller Bearings - TDO (Tapered Double Outer) Imperial. The con guration of the TDO provides a wide effective bearing
898 - 892 - Timken CAD
Browse Part Number 898 - 892, Tapered Roller Bearings - TS (Tapered Single) Imperial in the The Timken Company catalog including Part Number,Item Name
898A - 892CD - Timken CAD
898A - 892CD. Timken_TRB_2ROWASSY_TDO_438-90092-A2. Timken_TRB_2ROWASSY_TDO_438-90092-A. Timken_TRB_2ROWASSY_TDO_438-90092-
TIMKEN 898/892CD Double Row Tapered Roller Bearing 898
TIMKEN 898/892CD,Bearing type: Double Row Inch Tapered Roller Bearing,Cone Part: 898,Cup Part:892CD dimension:139.7x228.6x123.825mm Bearing
TIMKEN taper roller bearing 898/892CD
TIMKEN taper roller bearing 898/892CD is authorized in Singapore distributor warehouse. HongKong Royal Machinery Parts Co.,Ltd. is TIMKEN BEARING
898 - 892CD - Timken CAD
Browse Part Number 898 - 892CD, Tapered Roller Bearings - TDO (Tapered Double Outer) Imperial in the The Timken Company catalog including Part Number
Tapered roller bearing 898-892CD-TIMKEN - 139.7x228
Tapered roller bearing 898-892CD-TIMKEN , dim : Ø int. 139.7 x Ø ext. 228.6 x th. 123.83 mm. SAME DAY SHIPPING. The specialist at your service for over 10
Timken - 892CD - Motion Industries
Buy Timken Tapered Roller Bearing Cups 892CD direct from Motion ... Timken is the recognized global leader in tapered roller bearings. ... 898, 898A, 896